Provides comprehensive training and certification programs designed to strengthen competencies in food safety, hygiene and sanitation, quality management, and regulatory compliance. Our programs support professionals in implementing proper food handling practices, maintaining product quality, ensuring consumer safety, and improving operational standards across the FMCG and food industries.
Allergen Management Training membekali peserta dengan pemahaman mengenai identifikasi dan pengendalian alergen dalam proses produksi dan penanganan makanan. Materi mencakup allergen identification, cross-contact prevention, segregation, labeling, cleaning, dan risk control.
Duration: 1 Day
Certification: ESP Training Certificate
Validity: No expiry / according to training provider policy
Cleaning & Sanitation Training memberikan pengetahuan praktis mengenai metode pembersihan dan sanitasi yang efektif untuk fasilitas, peralatan, dan area kerja. Peserta mempelajari cleaning procedures, sanitizing methods, chemical handling, cleaning schedules, dan verification.
Duration: 1 Day
Certification: ESP Training Certificate
Validity: No expiry / according to training provider policy
Program Food Handler dirancang untuk membekali personel yang menangani makanan dengan pengetahuan dan keterampilan dasar mengenai keamanan pangan, kebersihan personal, sanitasi, pencegahan kontaminasi, penyimpanan, dan penanganan makanan yang aman.
Duration: 1–2 Days
Certification: Training Certificate / BNSP if an applicable competency scheme is available
Validity: According to certification scheme / training provider policy
Program ini memberikan pemahaman mengenai penerapan higiene dan sanitasi dalam proses penanganan makanan. Peserta mempelajari kebersihan personal, sanitasi fasilitas, pengendalian kontaminasi, kebersihan peralatan, serta praktik sanitasi yang baik di lingkungan kerja.
Duration: 1 Day
Certification: ESP Training Certificate
Validity: No expiry / according to training provider policy
Food Safety Awareness Training memberikan pemahaman dasar mengenai prinsip keamanan pangan dan faktor-faktor yang dapat menyebabkan kontaminasi makanan. Peserta memahami biological, chemical, physical, and allergen hazards serta cara menerapkan praktik kerja yang aman.
Duration: 1 Day
Certification: ESP Training Certificate
Validity: No expiry / according to training provider policy
GMP Training memberikan pemahaman mengenai prinsip dan praktik Good Manufacturing Practices untuk memastikan proses produksi berjalan secara higienis, konsisten, terkendali, dan memenuhi persyaratan keamanan serta mutu produk.
Duration: 1–2 Days
Certification: ESP Training Certificate
Validity: No expiry / according to training provider policy
HACCP Awareness Training memperkenalkan prinsip Hazard Analysis and Critical Control Points sebagai pendekatan sistematis untuk mengidentifikasi, mengevaluasi, dan mengendalikan bahaya keamanan pangan di sepanjang proses produksi dan penanganan makanan.
Duration: 1 Day
Certification: ESP Training Certificate
Validity: No expiry / according to training provider policy
Program HACCP Implementation membekali peserta dengan pengetahuan dan keterampilan untuk menerapkan sistem HACCP secara efektif. Materi mencakup hazard analysis, identification of critical control points, critical limits, monitoring, corrective actions, verification, dan documentation.
Duration: 2–3 Days
Certification: ESP Training Certificate / Certification Body, depending on the programme
Validity: According to certification body or training provider policy
HACCP Internal Auditor Training dirancang untuk membekali peserta dengan kemampuan dalam merencanakan, melaksanakan, mendokumentasikan, dan melaporkan audit internal terhadap sistem HACCP.
Duration: 2 Days
Certification: Training Certificate / Certification Body
Validity: According to certification body requirements; training certificates generally have no expiry unless otherwise specified
ISO 22000 Awareness Training memberikan pemahaman mengenai prinsip dasar Sistem Manajemen Keamanan Pangan berdasarkan ISO 22000. Peserta mempelajari pendekatan berbasis risiko, food safety hazards, prerequisite programmes, operational controls, serta continual improvement.
Duration: 1 Day
Certification: Training Certificate
Validity: No expiry / according to training provider policy
ISO 22000 Internal Auditor Training membekali peserta dengan kompetensi untuk merencanakan, melaksanakan, melaporkan, dan melakukan tindak lanjut audit internal Sistem Manajemen Keamanan Pangan berdasarkan ISO 22000.
Duration: 2 Days
Certification: Training Certificate / Certification Body
Validity: According to certification body requirements
Personal Hygiene Training memberikan pemahaman mengenai pentingnya kebersihan diri bagi personel yang bekerja di lingkungan pengolahan dan penanganan makanan. Peserta mempelajari personal cleanliness, hand hygiene, protective clothing, illness control, dan pencegahan kontaminasi.
Duration: 1 Day
Certification: ESP Training Certificate
Validity: No expiry / according to training provider policy
SSOP Training membekali peserta dengan pemahaman mengenai penyusunan dan penerapan prosedur sanitasi standar untuk menjaga kebersihan fasilitas, peralatan, personel, serta lingkungan produksi.
Duration: 1–2 Days
Certification: ESP Training Certificate
Validity: No expiry / according to training provider policy
Duration : Training: Approximately 8 hours (1 day) instructor-led or virtual training (provider-dependent).
Method:
• Instructor-led classroom training or virtual instructor-led training
• Interactive lectures and technical discussions
• Multimedia presentations and case-based learning
• Online proctored knowledge assessment through the IADC WellSharp Testing System).
Duration : Training: Approximately 8 hours (1 day) instructor-led or virtual training (provider-dependent).
Method:
• Instructor-led classroom training or virtual instructor-led training
• Interactive lectures and technical discussions
• Multimedia presentations and case-based learning
• Online proctored knowledge assessment through the IADC WellSharp Testing System).
Locations:
• Online (Accessible Worldwide)
• IADC WellSharp Accredited Training Centers worldwide
Target Audience
• New personnel entering drilling or well servicing operations
• Well Service Crew
• Rig Support Personnel
• Lease Operators
• Field Technicians
• Service Company Personnel
• Non-supervisory personnel requiring well control awareness
Certification
Certification: IADC WellSharp® Well Service Awareness Certificate
Assessment: Online knowledge assessment
Validity: 5 Years
Course Overview
This course introduces participants to the fundamental principles of well control and safe well servicing operations. It provides a basic understanding of well integrity, pressure control, hazard recognition, and the responsibilities of personnel involved in preventing and responding to well control incidents. The program establishes the foundational knowledge required to safely support well servicing activities in accordance with IADC WellSharp standards.
Topics include:
• Introduction to Well Servicing Operations
• Oil & Gas Industry Fundamentals
• Well Lifecycle Overview
• Well Integrity Principles
• Well Barrier Philosophy
• Basic Well Control Concepts
• Pressure & Formation Fundamentals
• Kick Recognition & Prevention
• Pressure Control Equipment (PCE)
• Blowout Prevention Fundamentals
• Hazard Identification & Risk Awareness
• Roles & Responsibilities During Well Control Events
• Emergency Response Procedures
• Industry Best Practices for Well Servicing
Pre-requisites
• No prior well control certification required.
• No previous field experience required.
• Suitable for personnel new to drilling or well servicing operations
Learning Objectives
Upon completion of this course, participants will be able to:
• Explain the basic principles of well control.
• Understand the importance of well integrity and well barriers.
• Identify common well servicing hazards and associated risks.
• Recognize the causes and warning signs of well control incidents.
• Describe the function of basic pressure control equipment.
• Apply safe work practices during well servicing operations.
• Demonstrate awareness of emergency response procedures and individual responsibilities.
Course Delivery
The course is delivered through instructor-led classroom or live virtual instruction using interactive presentations, practical examples, group discussions, and scenario-based learning. Training is supported by standardized IADC WellSharp course materials and concludes with an independently proctored online knowledge assessment to verify participant competency..
Course Outline
1. Module 1 – Introduction to Well Servicing
• Introduction to Well Service Operations
• Workover Objectives & Applications
• Well Lifecycle
• Well Integrity Principles
• Well Barrier Philosophy
2. Module 2 – Well Control Fundamentals
• Principles of Well Control
• Well Barrier Philosophy
• Formation Pressure & Hydrostatic Pressure
• Kick Causes & Prevention
3. Pressure Control EquipmentWell Control Principles
• Pressure Control Equipment (PCE)
• Blowout Preventer (BOP) Systems
• Surface Pressure Control Equipment
• Equipment Testing & Maintenance
4. Module 4 – Well Servicing Operations
• Workover Operations
• Completion Operations
• Basic Well Intervention
• Safe Operating Practices
5. Module 5 - Well Control Procedures
• Kick Detection
• Shut-in Procedures
• Well Kill Fundamentals
• Emergency Response
6. Module 6 – HSE & Risk Management
• Hazard Identification
• Risk Assessment
• Permit to Work
• Incident Prevention
• Emergency Planning
7. Module 7 – Assessment
• Course Review
• Knowledge Assessment (WellSharp Examination)
• Online (Accessible Worldwide)
• IADC WellSharp Accredited Training Centers worldwide
Target Audience
• New personnel entering drilling or well servicing operations
• Well Service Crew
• Rig Support Personnel
• Lease Operators
• Field Technicians
• Service Company Personnel
• Non-supervisory personnel requiring well control awareness
Certification
Certification: IADC WellSharp® Well Service Awareness Certificate
Assessment: Online knowledge assessment
Validity: 5 Years
Course Overview
This course introduces participants to the fundamental principles of well control and safe well servicing operations. It provides a basic understanding of well integrity, pressure control, hazard recognition, and the responsibilities of personnel involved in preventing and responding to well control incidents. The program establishes the foundational knowledge required to safely support well servicing activities in accordance with IADC WellSharp standards.
Topics include:
• Introduction to Well Servicing Operations
• Oil & Gas Industry Fundamentals
• Well Lifecycle Overview
• Well Integrity Principles
• Well Barrier Philosophy
• Basic Well Control Concepts
• Pressure & Formation Fundamentals
• Kick Recognition & Prevention
• Pressure Control Equipment (PCE)
• Blowout Prevention Fundamentals
• Hazard Identification & Risk Awareness
• Roles & Responsibilities During Well Control Events
• Emergency Response Procedures
• Industry Best Practices for Well Servicing
Pre-requisites
• No prior well control certification required.
• No previous field experience required.
• Suitable for personnel new to drilling or well servicing operations
Learning Objectives
Upon completion of this course, participants will be able to:
• Explain the basic principles of well control.
• Understand the importance of well integrity and well barriers.
• Identify common well servicing hazards and associated risks.
• Recognize the causes and warning signs of well control incidents.
• Describe the function of basic pressure control equipment.
• Apply safe work practices during well servicing operations.
• Demonstrate awareness of emergency response procedures and individual responsibilities.
Course Delivery
The course is delivered through instructor-led classroom or live virtual instruction using interactive presentations, practical examples, group discussions, and scenario-based learning. Training is supported by standardized IADC WellSharp course materials and concludes with an independently proctored online knowledge assessment to verify participant competency..
Course Outline
1. Module 1 – Introduction to Well Servicing
• Introduction to Well Service Operations
• Workover Objectives & Applications
• Well Lifecycle
• Well Integrity Principles
• Well Barrier Philosophy
2. Module 2 – Well Control Fundamentals
• Principles of Well Control
• Well Barrier Philosophy
• Formation Pressure & Hydrostatic Pressure
• Kick Causes & Prevention
3. Pressure Control EquipmentWell Control Principles
• Pressure Control Equipment (PCE)
• Blowout Preventer (BOP) Systems
• Surface Pressure Control Equipment
• Equipment Testing & Maintenance
4. Module 4 – Well Servicing Operations
• Workover Operations
• Completion Operations
• Basic Well Intervention
• Safe Operating Practices
5. Module 5 - Well Control Procedures
• Kick Detection
• Shut-in Procedures
• Well Kill Fundamentals
• Emergency Response
6. Module 6 – HSE & Risk Management
• Hazard Identification
• Risk Assessment
• Permit to Work
• Incident Prevention
• Emergency Planning
7. Module 7 – Assessment
• Course Review
• Knowledge Assessment (WellSharp Examination)
Training Schedule : 08.00 – 17.00
Assessment : IADC WellSharp® Online Proctored Written Examination conducted through the official IADC assessment system
Method:
• Instructor-Led Classroom Training (ILT)
• Interactive Lectures
• Group Discussion
• Scenario-Based Learning
• Well Control Case Studies
• Pressure Control Exercises
• Equipment Demonstration
• Well Control Simulations
• Official IADC WellSharp® Online Examination
Locations:
Training & Assessment: Jakarta, Balikpapan, Duri, or Online (depending on the selected training scheme).
Target Audience
• Participants who successfully complete the course and pass the official IADC examination will receive:
• IADC WellSharp® Certificate of Completion
• Well Servicing – Coiled Tubing Well Control Certification
• Validity
• 2 Years
• Issued by an IADC WellSharp® Accredited Training Provider following successful completion of the official examinationParticipants who successfully complete the course and pass the official IADC examination will receive:
• IADC WellSharp® Certificate of Completion
• Well Servicing – Coiled Tubing Well Control Certification
• Validity
• 2 Years
• Issued by an IADC WellSharp® Accredited Training Provider following successful completion of the official examination
Certification
IADC WellSharp® Certificate of Completion
Well Servicing – Coiled Tubing Well Control Certification min passing score. 70%
Validity 2 Years
Issued by an IADC WellSharp® Accredited Training Provider following successful completion of the official examination.
Course Overview
The IADC WellSharp® Well Service – Coiled Tubing program provides comprehensive training in well control principles for coiled tubing operations. The course is designed to develop the knowledge and practical decision-making skills required to prevent, recognize, and respond to well control incidents during well intervention activities.
Participants will learn barrier management, pressure control equipment, influx detection, well kill principles, gas behavior, completion fluids, operational procedures, emergency response, and risk management through instructor-led training, practical scenarios, and competency-based assessment. The curriculum follows the internationally recognized IADC WellSharp® Well Servicing standard, supporting safe and effective well intervention operations worldwide..
Topics include:
Fundamental Module
• Well Control Philosophy
• Risk Awareness & Risk Management
• Well Control Principles
• Pressure Concepts
• Well Barriers
Technical Module
• Coiled Tubing Pressure Control Equipment
• Surface & Subsurface Well Equipment
• Influx Fundamentals
• Gas Characteristics & Behaviour
• Completion & Workover Fluids
• Well Pressure Calculations
Assessment Module
• Scenario-Based Exercises
• Knowledge Review
• Official IADC WellSharp® Examination
Operational Module
• Coiled Tubing Operational Considerations
• Well Intervention Procedures
• Pressure Testing
• Barrier Verification
• Well Kill Preparation
• Emergency Response
• Well Control Drills
Pre-requisites
• Have basic knowledge of oil & gas well servicing operations.
• Be involved in coiled tubing or well intervention activities.
• Have experience in wellsite operations (recommended).
• Be physically and mentally fit.
• Possess basic understanding of pressure control equipment and well servicing operations (recommended).
Learning Objectives
Upon completion of this course, participants will be able to:
• Explain fundamental well control principles.
• Recognize potential well control hazards during coiled tubing operations.
• Apply risk management principles in well servicing activities.
• Understand barrier philosophy and barrier verification.
• Operate and understand coiled tubing pressure control equipment.
• Identify influx indicators and appropriate response actions.
• Perform well control calculations.
• Prepare for well kill operations.
• Respond appropriately to well control emergencies.
• Successfully complete the IADC WellSharp® knowledge assessment.
Course Delivery
The course is delivered through instructor-led classroom sessions supported by technical presentations, interactive discussions, scenario-based learning, case studies, pressure control exercises, and practical well control simulations. Participants complete the official IADC WellSharp® online proctored examination to demonstrate competency in accordance with internationally recognized well control standards.
Course Outline
1. Module 1 – Introduction to Well Control
• Well Control Philosophy
• Risk Awareness & Management
• Well Control Responsibilities
2. Module 2 – Well Control Fundamentals
• Pressure Concepts
• Barrier Philosophy
• Well Control Principles
• Well Pressure Calculations
3. Module 3 – Well Equipment
• Surface Well Equipment
• Subsurface Well Equipment
• Coiled Tubing Pressure Control Equipment
4. Module 4 – Well Fluids & Influx
• Surface Well Equipment
• Subsurface Well Equipment
• Coiled Tubing Pressure Control Equipment
5. Module 5 – Coiled Tubing Operations
• Operational Planning
• Operational Considerations
• Barrier Verification
• Pressure Testing
6. Module 6 – Well Kill & Emergency Response
• Well Kill Preparation
• Emergency Procedures
• Well Control Drills
7. Module 6 – Well Kill & Emergency Response
• Scenario-Based Well Control Exercises
• Operational Decision Making
• Case Study Review
8. Module 6 – Final Assessment
• Knowledge Review
• Official IADC WellSharp® Online Examination
• Course Evaluation
2. Module 2 – Well Control Fundamentals
• Principles of Well Control
• Well Barrier Philosophy
• Formation Pressure & Hydrostatic Pressure
• Kick Causes & Prevention
3. Pressure Control Equipment Well Control Principles
• Pressure Control Equipment (PCE)
• Blowout Preventer (BOP) Systems
• Surface Pressure Control Equipment
• Equipment Testing & Maintenance
4. Module 4 – Workover Operations
• Tubing Running & Pulling Operations
• Completion Installation & Removal
• Workover Fluids & Circulation
• Fishing & Milling Awareness
• Well Stimulation & Intervention Overview
5. Module 5 - Well Control Procedures
• Kick Detection
• Shut-in Procedures
• Well Kill Fundamentals
• Emergency Response
6. Module 6 – HSE & Risk Management
• Hazard Identification
• Risk Assessment
• Permit to Work
• Incident Prevention
• Emergency Planning
7. Module 7 – Assessment
• Course Review
• Knowledge Assessment (WellSharp Examination)
Training Schedule : 08.00 – 17.00
Assessment : Official IADC WellSharp® Online Proctored Knowledge Assessment. The Wireline course is delivered as a standalone Instructor-Led Training (ILT) program.
Method:
• Instructor-Led Classroom Training (ILT)
• Interactive Lectures
• Technical Presentations
• Group Discussion
• Scenario-Based Learning
• Well Control Case Studies
• Pressure Control Exercises
• Equipment Demonstration
• Official IADC WellSharp® Online Examination
Locations:
Training & Assessment: Jakarta, Balikpapan, Duri, or Online (depending on the selected training scheme).
Target Audience
• Snubbing Operators
• Snubbing Supervisors
• Hydraulic Workover Personnel
• Well Intervention Engineers
• Well Service Engineers
• Field Engineers
• Wellsite Supervisors
• Completion Engineers
• Oil & Gas Service Company Personnel
• Personnel responsible for well control during snubbing (hydraulic workover) operations.
Certification
Participants who successfully complete the course and pass the official assessment will receive:
IADC WellSharp® Certificate of Completion
Well Servicing – Snubbing Well Control Certification
Assessment Requirements
Minimum Passing Score: 70%
Certificate Validity: 2 Years.
Course Overview
The IADC WellSharp® Well Service – Snubbing program provides comprehensive well control training for personnel involved in snubbing (hydraulic workover) operations. The course develops the knowledge and decision-making skills necessary to safely conduct pipe movement under pressure while maintaining well integrity and preventing well control incidents.
Participants will gain an understanding of well control philosophy, pressure concepts, barrier management, snubbing equipment, pressure control systems, well fluids, influx recognition, well kill preparation, testing procedures, emergency response, and operational risk management. The curriculum follows the internationally recognized IADC WellSharp® Well Servicing standard and emphasizes safe and efficient snubbing operations.
Topics include:
Fundamental Module
• Well Control Philosophy
• Risk Awareness & Risk Management
• Well Control Principles
• Pressure Concepts
• Well Barriers
Technical Module
• Snubbing Equipment
• Surface Well Equipment
• Subsurface Well Equipment
• Pressure Control Equipment
• Completion & Workover Fluids
• Influx Fundamentals
• Gas Characteristics & Behaviour
• Well Pressure Calculations
Assessment Module
• Scenario-Based Exercises
• Knowledge Review
• Official IADC WellSharp® Online Assessment
Operational Module
• Snubbing Operations
• Pipe Light / Pipe Heavy Concepts
• Snub Force Calculations
• Stripping Operations
• Well Kill Preparation for Dead Well Intervention
• Pressure Testing
• Emergency Response
• Well Control Policies
Pre-requisites
• Snubbing Operations
• Pipe Light / Pipe Heavy Concepts
• Snub Force Calculations
• Stripping Operations
• Well Kill Preparation for Dead Well Intervention
• Pressure Testing
• Emergency Response
• Well Control Policies
Learning Objectives
Upon completion of this course, participants will be able to:
• Explain well control philosophy and principles.
• Apply risk awareness and barrier management concepts.
• Understand pressure concepts and well control calculations.
• Operate and understand snubbing pressure control equipment.
• Explain pipe light and pipe heavy conditions.
• Perform basic snub force calculations.
• Recognize influx indicators and respond appropriately.
• Prepare for well kill operations.
• Apply safe snubbing operational procedures.
• Respond effectively to well control emergencies.
• Successfully complete the official IADC WellSharp® assessment.
Course Delivery
The course is delivered through instructor-led classroom sessions using technical presentations, interactive discussions, operational case studies, scenario-based learning, equipment demonstrations, well control exercises, and knowledge reviews. Competency is verified through the official IADC WellSharp® online proctored assessment.
Course Outline
1. Module 1 – Introduction to Well Control
• Well Control Philosophy
• Risk Awareness & Management
• Well Control Responsibilities
2. Module 2 – Well Control Fundamentals
• Pressure Concepts
• Barrier Philosophy
• Well Control Principles
• Well Pressure Calculations
3. Module 3 – Snubbing Equipment
• Surface Well Equipment
• Subsurface Well Equipment
• Snubbing Unit Components
• Pressure Control Equipment
• Stripping Rams
• Dynamic Stripping BOPs
4. Module 4 – Well Fluids & Influx
• Pipe Light & Pipe Heavy Concepts
• Snub Force Calculations
• Snubbing Procedures
• Completion & Workover Fluids
5. Module 5 – Wireline Operations
• Planned Responses to Well Control Scenarios
• Operational Planning
• Barrier Verification
• Pressure Testing
6. Module 6 – Well Kill & Emergency Response
• Well Kill Preparation
• Pressure Testing
• Auxiliary Well Control
• Accumulator Systems
• Well Control Drills
• Organizing Well Control Operations
• Government, Industry & Company Policies
7. Module 7 – Practical Exercises
• Scenario-Based Well Control Exercises
• Operational Decision Making
• Case Study Review
8. Module 6 – Final Assessment
• Knowledge Review
• Official IADC WellSharp® Online Examination
• Course Evaluation
Duration : Training: Training: ± 16–20 hours (2–3 days instructor-led training)
Method:
• Instructor-led classroom or virtual training
• Interactive presentation & discussion
• Case studies & basic calculations
• Video-based learning
• Online multiple-choice assessment (WellSharp system)
Locations:
• Online (Accessible Worldwide)
• IADC WellSharp Accredited Training Centers worldwide
Target Audience
• New personnel in oil & gas industry
• Well service crew (entry level)
• Field technicians
• Lease operators
• Service company personnel
• Non-supervisory personnel in drilling/workover operations
Certification
Certification : IADC WellSharp® Well Service Introductory Certificate
Level : Introductory / Awareness Level
Validity : ± 5 years (industry practice under WellSharp certification cycle)
Course Overview
This introductory course provides fundamental knowledge of well servicing operations and basic well control principles. It is designed to build awareness of well integrity, pressure control concepts, hazard recognition, and safe working practices in well servicing environments.
Topics include:
• Introduction to Oil & Gas Industry
• Well Servicing Operations Overview
• Well Lifecycle Fundamentals
• Well Integrity Basics
• Well Barrier Concept
• Basic Well Control Principles
• Formation Pressure Awareness
• Hydrostatic Pressure Basics
• Kick Detection Awareness
• Introduction to Pressure Control Equipment
• Blowout Prevention Fundamentals
• Hazard Identification
• Risk Awareness in Well Operations
• Emergency Response Awareness
• Roles & Responsibilities in Well Control Situations
Pre-requisites
• No prior oil & gas experience required
• Suitable for entry-level personnel
• Basic literacy in technical English recommended
Learning Objectives
Upon completion of this course, participants will be able to:
• Understand basic well servicing operations
• Recognize well control hazards and risks
• Explain basic well integrity and barrier concepts
• Identify common well control situations
• Understand basic pressure control equipment
• Apply fundamental safety practices in well operations
• Support safe work behavior in field operations
Course Delivery
The course is delivered through structured instructor-led training or virtual sessions supported by presentations, discussions, visual materials, and basic case studies. Learning is reinforced with knowledge checks, followed by an online WellSharp assessment to validate understanding of well servicing fundamentals.
Course Outline
1. Module 1 – Introduction to Well Servicing & Workover
• Overview of Well Servicing Operation
• Workover Objectives & Applications
• Well Lifecycle
• Roles & Responsibilities
• Well Integrity Fundamentals
2. Module 2 – Well Control Fundamentals
• Principles of Well Control
• Well Barrier Philosophy
• Formation Pressure & Hydrostatic Pressure
• Kick Causes & Prevention
3. Pressure Control Equipment Well Control Principles
• Pressure Control Equipment (PCE)
• Blowout Preventer (BOP) Systems
• Surface Pressure Control Equipment
• Equipment Testing & Maintenance
4. Module 4 – Workover Operations
• Tubing Running & Pulling Operations
• Completion Installation & Removal
• Workover Fluids & Circulation
• Fishing & Milling Awareness
• Well Stimulation & Intervention Overview
5. Module 5 - Well Control Procedures
• Kick Detection
• Shut-in Procedures
• Well Kill Fundamentals
• Emergency Response
6. Module 6 – HSE & Risk Management
• Hazard Identification
• Risk Assessment
• Permit to Work
• Incident Prevention
• Emergency Planning
7. Module 7 – Assessment
• Course Review
• Knowledge Assessment (WellSharp Examination)
Training Schedule : 08.00 – 17.00
Assessment : Official IADC WellSharp® Online Proctored Knowledge Assessment. The Wireline course is delivered as a standalone Instructor-Led Training (ILT) program.
Method:
• Instructor-Led Classroom Training (ILT)
• Interactive Lectures
• Technical Presentations
• Group Discussion
• Scenario-Based Learning
• Well Control Case Studies
• Pressure Control Exercises
• Equipment Demonstration
• Official IADC WellSharp® Online Examination
Locations:
Training & Assessment: Jakarta, Balikpapan, Duri, or Online (depending on the selected training scheme).
Target Audience
• Wireline Operators
• Field Engineers
• Senior Field Engineers
• Wireline Supervisors
• Cased Hole Engineers
• Open Hole Engineers
• Production Logging Personnel
• Pipe Recovery Personnel
• TCP (Tubing Conveyed Perforating) Personnel
• Well Intervention Engineers
• Well Service Supervisors
• Oil & Gas Service Company Personnel
• Personnel responsible for well control during wireline operations.
Certification
Participants who successfully complete the course and pass the official assessment will receive:
IADC WellSharp® Certificate of Completion
Well Servicing – Wireline Well Control Certification
Assessment Requirements
Minimum Passing Score: 70%
Certificate Validity: 2 Years.
Course Overview
The IADC WellSharp® Well Service – Wireline program provides comprehensive well control training for personnel involved in wireline well intervention operations. The course develops the knowledge and decision-making skills required to recognize, prevent, and respond to well control events while conducting wireline activities.
Participants learn well control philosophy, pressure concepts, barrier management, wireline pressure control equipment, well fluids, gas behaviour, influx recognition, operational planning, well kill preparation, emergency response, and industry best practices. The curriculum follows the internationally recognized IADC WellSharp® Well Servicing standard and emphasizes safe execution of wireline operations.
Topics include:
Fundamental Module
• Well Control Philosophy
• Risk Awareness & Risk Management
• Well Control Principles
• Pressure Concepts
• Well Barriers
Technical Module
• Wireline Pressure Control Equipment
• Surface Well Equipment
• Subsurface Well Equipment
• Well Fluids
• Gas Characteristics & Behaviour
• Influx Fundamentals
• Well Pressure Calculations
Assessment Module
• Scenario-Based Exercises
• Knowledge Review
• Official IADC WellSharp® Online Assessment
Operational Module
• Reasons for Wireline Operations
• Wireline Operational Procedures
• Barrier Verification
• Pressure Testing
• Well Kill Preparation
• Emergency Response
• Well Control Policies
Pre-requisites
• Have basic knowledge of oil & gas well servicing operations.
• Be involved in wireline or well intervention operations.
• Previous field experience in wireline operations is recommended.
• Be physically and mentally fit.
Learning Objectives
Upon completion of this course, participants will be able to:
• Explain well control philosophy and principles.
• Understand pressure concepts and barrier management.
• Identify wireline well control hazards.
• Operate and understand wireline pressure control equipment.
• Recognize influx indicators and respond appropriately.
• Perform basic well control calculations.
• Prepare for well kill operations.
• Apply safe wireline operational procedures.
• Respond effectively to well control emergencies.
• Successfully complete the official IADC WellSharp® assessment.
Course Delivery
The course is delivered through instructor-led classroom sessions using technical presentations, interactive discussions, operational case studies, scenario-based exercises, pressure control demonstrations, and knowledge reviews. Competency is verified through the official IADC WellSharp® online proctored assessment..
Course Outline
1. Module 1 – Introduction to Well Control
• Well Control Philosophy
• Risk Awareness & Management
• Well Control Responsibilities
2. Module 2 – Well Control Fundamentals
• Pressure Concepts
• Barrier Philosophy
• Well Control Principles
• Well Pressure Calculations
3. Module 3 – Wireline Equipment
• Surface Well Equipment
• Subsurface Well Equipment
• Wireline Pressure Control Equipment
4. Module 4 – Well Fluids & Influx
• Influx Fundamentals
• Gas Characteristics
• Well Fluids
• Pressure Behaviour
5. Module 5 – Wireline Operations
• Reasons for Wireline Operations
• Operational Planning
• Barrier Verification
• Pressure Testing
6. Module 6 – Well Kill & Emergency Response
• Well Kill Preparation
• Emergency Procedures
• Well Control Drills
7. Module 7 – Practical Exercises
• Scenario-Based Well Control Exercises
• Operational Decision Making
• Case Study Review
8. Module 6 – Final Assessment
• Knowledge Review
• Official IADC WellSharp® Online Examination
• Course Evaluation
2. Module 2 – Well Control Fundamentals
• Principles of Well Control
• Well Barrier Philosophy
• Formation Pressure & Hydrostatic Pressure
• Kick Causes & Prevention
3. Pressure Control Equipment Well Control Principles
• Pressure Control Equipment (PCE)
• Blowout Preventer (BOP) Systems
• Surface Pressure Control Equipment
• Equipment Testing & Maintenance
4. Module 4 – Workover Operations
• Tubing Running & Pulling Operations
• Completion Installation & Removal
• Workover Fluids & Circulation
• Fishing & Milling Awareness
• Well Stimulation & Intervention Overview
5. Module 5 - Well Control Procedures
• Kick Detection
• Shut-in Procedures
• Well Kill Fundamentals
• Emergency Response
6. Module 6 – HSE & Risk Management
• Hazard Identification
• Risk Assessment
• Permit to Work
• Incident Prevention
• Emergency Planning
7. Module 7 – Assessment
• Course Review
• Knowledge Assessment (WellSharp Examination)
Duration : Training: ± 35–36 hours (4–5 days classroom training).
Method:
• Instructor-led classroom training / virtual instructor-led training
• Interactive lectures & technical discussion
• Case studies & group exercises
• Well control calculations practice
• Simulator-based learning (optional depending provider)
• Online proctored WellSharp assessment
Locations:
• Online (Accessible Worldwide)
• IADC WellSharp Accredited Training Centers worldwide
Target Audience
• Workover Supervisor / Rig Supervisor
• Well Service Supervisor
• Completion & Intervention Engineer
• Service Company Personnel
• Hydraulic Workover Crew
• Driller / Assistant Driller (Workover operations)
• Oil & Gas Operator Representative
Certification
Certification : IADC WellSharp® Workover Well Control Certificate
Level : Introductory / Operator / Supervisor (based on role)
Validity : 2 years (Supervisor level), up to 5 years (Introductory level depending certification path)
Course Overview
This course provides essential knowledge and competency in well control for workover and well servicing operations. It focuses on maintaining well integrity, understanding pressure control systems, managing well barriers, and safely executing workover activities. The training develops the ability to recognize and respond to well control situations in accordance with IADC WellSharp standards.
Topics include:
• Well Servicing & Workover Operations Overview
• Well Lifecycle & Well Integrity
• Well Barrier Philosophy
• Formation Pressure & Hydrostatic Pressure
• Kick Detection & Prevention
• Well Control Principles
• Pressure Control Equipment (PCE)
• Blowout Preventer (BOP) Systems
• Completion & Workover Fluids
• Workover Operations Procedures
• Tubing Running & Pulling Operations
• Well Kill Methods
• Risk Awareness & Management
• Emergency Response & Contingency Planning
• Surface & Subsurface Equipment Overview
• Industry Standards & Best Practices
Pre-requisites
• Basic understanding of oil & gas operations recommended
• No mandatory prior certification for introductory level
• Work experience in well servicing/workover operations preferred for higher level (Operator/Supervisor)
Learning Objectives
Upon completion of this course, participants will be able to:
• Understand workover and well servicing operations
• Explain well control principles and well barrier systems
• Identify and operate pressure control equipment safely
• Recognize kicks and apply prevention methods
• Perform basic well kill procedures
• Apply risk management in workover operations
• Respond effectively to well control emergencies
• Ensure safe execution of well intervention activities
Course Delivery
The course is delivered through structured classroom or virtual instruction supported by presentations, technical discussions, case studies, and practical exercises. Participants undergo competency-based learning aligned with IADC WellSharp standards, followed by an online proctored examination to validate knowledge and understanding of workover well control principles.
Course Outline
1. Module 1 – Introduction to Well Servicing & Workover
• Overview of Well Servicing Operation
• Workover Objectives & Applications
• Well Lifecycle
• Roles & Responsibilities
• Well Integrity Fundamentals
2. Module 2 – Well Control Fundamentals
• Principles of Well Control
• Well Barrier Philosophy
• Formation Pressure & Hydrostatic Pressure
• Kick Causes & Prevention
3. Pressure Control Equipment Well Control Principles
• Pressure Control Equipment (PCE)
• Blowout Preventer (BOP) Systems
• Surface Pressure Control Equipment
• Equipment Testing & Maintenance
4. Module 4 – Workover Operations
• Tubing Running & Pulling Operations
• Completion Installation & Removal
• Workover Fluids & Circulation
• Fishing & Milling Awareness
• Well Stimulation & Intervention Overview
5. Module 5 - Well Control Procedures
• Kick Detection
• Shut-in Procedures
• Well Kill Fundamentals
• Emergency Response
6. Module 6 – HSE & Risk Management
• Hazard Identification
• Risk Assessment
• Permit to Work
• Incident Prevention
• Emergency Planning
7. Module 7 – Assessment
• Course Review
• Knowledge Assessment (WellSharp Examination)
